ADD5110 Dual Reader Interface

Partcode:
  • V6FL7820-8CA11
The ADD5110 provides an interface between a card reader and the advanced central controller (AC5102 or AC5200) for up to two card readers. When a cardholder presents the access card at an entry or exit reader the ADD5110 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time.
  • Interface

    FLN connection to controller: RS485 To reader: One RS485 bus for up to two RS485 readers (CerPass protocol) OR two Wiegand/Clock&Data ports

  • Operating voltage

    24 VDC ±20 %

  • Power output

    Reader: 300 mA Ancillary: 1 A

  • Power consumption

    25 W

  • Outputs

    1 x Lock output relay (30 VDC‚ 2 A) 1 x Auxiliary relay (30 VDC‚ 2 A)

  • Inputs

    1 x REX-button 1 x Door contact 3 x Auxiliary All inputs unsupervised or supervised

  • Tamper switch

    Optional‚ auxiliary input

  • Firmware

    Flash upgradeable

  • Indicators

    Power‚ Activity‚ Communication

  • Dimensions (W x H x D)

    150 x 150 x 76 (mm)

  • Housing protection

    IP55

  • Housing

    ABS plastic

  • Weight

    0.55 kg

  • Approval

    CE

  • Interfaces

    FLN connection to central controller: RS485 Connection to readers: RS485 bus for max 2 CerPass readers or 2 Clock & Data / Wiegand ports

  • Housing material

    Plastic ABS