Access Control/Products/Readers/Smart Card 13.56MHz
ARC-A

ARC-A MF DESFire reader + interface

Partcode:
  • N54504-F110-A100
The ARC-A and ARC-B readers use the latest MIFARE® and DESFIRE® contactless chip technologies with new data security mechanisms. They implement public encryption algorithms (TDES, AES, RSA, SHA, etc.), as recommended and recognized by the French national security agency ANSSI. The decoder / interface is a data encryption and authentication device for read-only readers. This smart decoder converts Secure RS485 communication into a plain Wiegand, Data / Clock or RS485 communication. This decoder assures confidentiality and integrity of the communication between the reader and the system.
Technical dataDocumentationCertificatesImport & Export

  • Interface to controller

    - Reader: RS485 - Interface: RS485 - Wiegand or Clock & Data (TTL)

  • Card read distance

    jusqu'à 8cm - MIFARE® Classic card Jusqu'à 6cm - MIFARE Plus® / DESFire® EV1 card

  • Indicators

    2 RGB LEDs – 360 colors (Configuration by card)

  • Power supply

    - Lecteur: 7VDC à 28VDC - Interface: 5VDC à 24VDC

  • Current consumption

    - Reader: Typical 100mA / 12VDC - Interface: Typical 40mA / 12VDC

  • Operating temperature

    - 20°C ~ + 70°C

  • Housing material

    ABS-PC UL-V0

  • Housing protection

    IP65

  • Dimensions (W x H x D)

    - Lecteur: 107 x 80 x 26 (mm) - Interface: 93 x 45 (mm) (PCB seul), 97 x 49 x 34 (mm) (avec kit de montage)

  • Approval

    CE, FCC, UL

  • Card compatibility

    MIFARE Ultralight® & Ultralight® C, MIFARE® Classic & EV1, Plus®, DESFire® EV1 & EV2, iCLASS® (CSN seulement)

  • LED Indicators

    2 LEDs Tricolores RVB– 360 couleurs (Configuration par carte)

  • Buzzer

    Indicateur sonore interne (Configuration par carte)

  • Tamper protection

    Système d'autoprotection à base d'accéléromètre

  • Housing protection (EN 60529)

    IP65 level – water-resistant with waterproof electronics Reinforced vandal proof structure IK10

  • Connectors

    - Lecteur: 10-pin plug-in (5mm) / 2-pin plug-in connector (5mm): contact O/F – Signal de détection d'autoprotection - Interface: Entrée RS485 (côté lecteur): 4 points; sortie TTL (côté UTL): 9 points

  • Communication protocol

    - Lecteur: RS485 - Interface: RS485 - Wiegand ou Clock & Data (TTL)

  • Power consumption

    - Lecteur: Typique 100mA / 12VDC - Interface: Typique 40mA / 12VDC

  • Supply voltage

    - Reader: 7VDC to 28VDC - Interface: 5VDC to 24VDC