Access Control/Products/Door Modules/SiPass Integrated
ads5200

ADS5200 Single Reader Interface

Partcode:
  • V6FL7820-8CA20
The ADS5200 provides a Clock&Data/Wiegand interface between a card reader and the advanced central controller (AC5102 or AC5200) for one card reader. When a cardholder presents an access card at an entry or exit reader the ADS5200 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time. Note: The ADS5200 does not have an RS485 interface for card readers. It supports Clock&Data or Wiegand readers only.
Technical dataDocumentationCertificatesImport & Export

  • Interface

    FLN connection to controller: RS485 To readers:Clock&Data or Wiegand port

  • Operating voltage

    12 VDC ±20 %

  • Power consumption

    12 W

  • Outputs

    1 x Lock output relay (30 VDC‚ 2 A) 1x Open-collector output (100 mA‚ 12 VDC)

  • Inputs

    1 x REX-button 1 x Door contact 2 x Auxiliary All inputs unsupervised or supervised

  • Tamper switch

    Optional‚ auxiliary input

  • Firmware

    Flash upgradeable

  • Indicators

    Power‚ Activity‚ Communication

  • Dimensions (W x H x D)

    125 x 125 x 34 (mm)

  • Weight

    0.25 kg

  • Approval

    CE‚ UL294‚ C-Tick

  • Interfaces

    FLN connection to central controller: RS485 Connection to readers: Clock & Data or Wiegand port